Three Ways to Shrink an Image: Dimensions, Quality or Format First?

A 4000×3000 image run through this site's tools while changing its longest side, quality and format one at a time. Which setting to change first to meet a file-size limit.

Published
Updated

Pixel count, compression and format decide the size

An image file’s size is set almost entirely by three things: the number of pixels, the quality setting for JPG and WebP, and the file format. When you hit an upload limit, changing all three at once hides which one did the work and tends to cost more image quality than needed. Here the same image was changed one setting at a time, using the image compressor and the image converter.

What was measured

The source is a 4000×3000 image made with code, with sky, hills, grass texture and sensor-like noise. Saved as a quality-92 JPG it is 2,433 KB, and saved as a PNG it is 20,772 KB. The tools were run as a visitor would use them in Chromium 153 in October 2026, and the size of each result file was recorded. Real photos vary with the scene, so look at how much the size changes when a setting changes, not at the absolute numbers.

Reducing the longest side shrinks the file the most

Quality was fixed at 75% and only the longest side was changed.

Longest side Dimensions Size Compared with 4000 px
Original 4000×3000 1,024 KB 100%
3840 px 3840×2880 856 KB 84%
2560 px 2560×1920 421 KB 41%
1920 px 1920×1440 241 KB 24%
1280 px 1280×960 110 KB 11%

The size followed the pixel count closely. 1920×1440 has 23% of the original pixels and came out at 24% of the size; 1280×960 has 10% of the pixels and came out at 11%. Cutting the longest side from 4000 px to 1920 px takes the file below a quarter of its size with the same quality setting. For viewing on screen, posting on the web or submitting with a form, 1920 px is usually enough. Keep the original dimensions for anything you will print. If you need an exact width and height, the resize tool lets you set them.

Lower quality shrinks the file, but saving higher than the source does not help

Here the dimensions stayed at the original and only the quality changed.

Quality Size Compared with the source (2,433 KB)
95% 2,433 KB not smaller, original kept
90% 2,297 KB −6%
75% 1,024 KB −58%
60% 705 KB −71%
45% 558 KB −77%
30% 412 KB −83%

The biggest drop came between 90% and 75%, and the savings get smaller below that. The source was saved at quality 92, so saving it again at 95% does not make it smaller. In that case the tool keeps the original file as the result. Saving a low-quality JPG at a higher setting does not bring the detail back, it only adds bytes. How much the picture degrades was not part of this measurement. Stop around 70–80%, zoom in and judge by eye, and go higher for screenshots with text or images meant for print.

Format: a photo saved as PNG is far smaller as JPG or WebP

This is the PNG version of the same image (20,772 KB) run through the converter.

Conversion Size Compared with PNG
JPG, quality 90 2,139 KB −90%
WebP, quality 90 1,595 KB −92%
JPG, quality 75 1,014 KB −95%
WebP, quality 75 596 KB −97%

At the same quality number, WebP came out smaller than JPG. With the longest side at 1920 px and quality 75%, JPG was 241 KB and WebP 151 KB, about 37% smaller. The quality numbers belong to two different compression methods, though, so equal numbers do not mean equal visual quality. These are size comparisons only, so check the result by eye. Use PNG or WebP for logos and images that need a transparent background, and JPG for photos you send to other people or attach to a form, since it opens everywhere.

Shrinking many images at once

The compressor takes many images, applies the same settings to each and lets you download them as a ZIP. It shows the new size of each image and the overall saving. With settings that keep the format and dimensions, a file that is already small and cannot shrink further is kept as it is, so it is fine to mix photos of very different sizes. Images are processed one after another, so a long list takes a while, and on a phone it is steadier to work in batches of a few dozen.

Steps for meeting a file-size limit

  1. Keep the original and always start from it.
  2. Reduce the longest side to 1920 px. That alone usually shrinks the file a lot.
  3. If it is still too big, lower the quality from 75% to 60%, or reduce the longest side to 1280 px.
  4. For a photo saved as PNG, converting to JPG or WebP has the biggest effect.
  5. Open the result and check that text and faces are readable, and note the new dimensions and size.

Reducing dimensions and quality makes the file smaller but cannot be undone, so never shrink an already shrunk copy again. The results carry no EXIF data such as shooting location, and everything runs on your device, so the photo is never uploaded.