Some PDFs shrink and some do not
A PDF’s size comes from three kinds of content: photos or scanned images, text and fonts, and vector drawings made of lines and shapes. A compressor can reliably shrink only the images. Lowering their resolution and saving them again as JPEG makes them much smaller with little visible change. Text and vector drawings are already stored compactly, so there is little left to remove. That is why the same PDF compression tool gives very different results on different files.
To see which kind you have, try selecting body text with your mouse in a PDF viewer. If nothing can be selected, each page is a picture, which is typical of a scan. If text can be selected and the file is still unusually large for its page count, the cause is probably photos placed on the pages or a complex drawing.
Four test PDFs, measured
The measurements come from running this site’s compression tool in Chromium 153 exactly as a visitor would, in October 2026. The PDFs were built from synthetic images made with code, not real scans or photos, so read the table for how results differ by file type rather than for exact sizes. The two PDFs with images also carry one line of text per page.
| Sample | Original | Light | Balanced | Strong | Whole pages to images (Balanced) |
|---|---|---|---|---|---|
| Scan type: A4 300 dpi image, 5 pages | 621 KB | 276 KB (−56%) | 159 KB (−74%) | 95 KB (−85%) | 583 KB (−6%) |
| Photo type: 4000×3000 photo, 3 pages | 1.5 MB | 429 KB (−71%) | 158 KB (−89%) | 51 KB (−97%) | 224 KB (−85%) |
| Text only, 20 pages | 24 KB | no gain | no gain | no gain | 4.6 MB (larger) |
| Line drawings, 5 pages, no images | 1.2 MB | no gain | no gain | no gain | 2.2 MB (larger) |
“No gain” means the tool did not offer a download and said it could not make the file smaller. In the two image samples the text survived every level: the text read back from the results was 55 characters for the scan sample and 36 for the photo sample, the same as what was put in. After whole-page conversion, no text could be read back at all.
PDFs with images: start with Balanced, then check the print
Each step up in level shrinks the file a lot, and each also blurs the images a little more. The scan sample goes from 276 KB at Light to 159 KB at Balanced. The tool resizes images to a longest side of 2,400 pixels at Light, 1,800 at Balanced and 1,200 at Strong. For an image that fills an A4 page, 1,800 pixels is about 150 dpi, which is usually enough for reading on screen and printing on an office printer.
Compress with Balanced first, then open the result and zoom in on the smallest text and on any signature or stamp. If it is hard to read, do not compress the result again. Go back to the original and start over one level lower, because saving an already compressed image as JPEG a second time costs more quality. Choose Light for scans with dense small print, and Strong when the upload limit is tight.
For text or drawings, whole-page conversion is not the answer
The whole-page option redraws every page as pixels and saves them. The 24 KB text-only PDF became 4.6 MB that way, about 200 times larger, and the 1.2 MB line-drawing PDF became 2.2 MB. It did not beat the default method on the image PDFs either: the scan sample shrank by only 6%, and the photo sample by 85% against 89% for the default method, with the text no longer selectable. The tool never downloads a result that is larger than the original, so trying it costs nothing, but it is not an option to count on.
If a PDF with few images is over an upload limit, re-exporting it from the program that made it, with lower picture resolution, is the better route. If that is not possible, the Split PDF tool can cut the file into two parts. Check with the recipient first that two files are acceptable.
Steps for meeting an upload limit
- Keep the original untouched. Always compress from the original.
- Compress with Balanced, then open the result and check small text and signatures.
- If it is still too large, try Strong. If that makes it unreadable, drop this step.
- For a PDF with few images, or one that is still too big, consider splitting it.
- If you can rescan, lower the scan resolution first. For a document you built from several photos, see how to turn photos into one PDF.
Reading these measurements with care
The scan sample is a paper-colored background with line-of-text shapes, so it compresses better than a real scan would. The photo sample imitates a landscape with sensor noise. Real files will shrink by different amounts depending on their content, so use the table to judge which kinds of file can shrink and roughly how much. Browsers also save JPEG slightly differently, so sizes can vary a little. Everything runs on your device and the file is never uploaded.